Food processors are very popular across manufacturers and enjoy great popularity. That is reason enough for us to shed light on the subject of food processor and safety.

Your food processor fails the service? No problem! Our food processor specialists quickly and promptly repair your kitchen helpers.

Kitchen appliances can be found in many households. This does not mean that the owners use the devices to the same extent. While they are sometimes unused for months on the shelf or in the corner, they are in numerous kitchens several times a week to daily in operation.

Why The Topic “Food Processor And Safety”?

The machines are electrical devices whose motor lets sharp knives rotate quickly and kneading tools powerfully. That alone carries a certain security risk in itself. In addition, the devices contain, depending on the equipment, more or less complicated circuits and heaters.

CE Marking

Every electrical device that comes to market in Germany and within the EU must bear the CE mark. However, the European Commission points out that the CE marking does not mean that “products are approved by the EU or other authorities as safe” . The CE mark is not a certificate of origin. It simply means that CE marked products can be traded throughout the European Economic Area.

In addition, the former Industry Commissioner Günter Verheugen said in a request to China-made devices: The EU Commission would not be known labeling, which would stand for China export. However, an improper affixing of the CE marking or a false logo can not be ruled out.

This is by no means a prejudice, but only the reproduction of a quote. Rather, I would like to assume that manufacturers and sellers take into account the various requirements, for example in the area of ​​product safety, electromagnetic compatibility (EMC) or radio characteristics.

Who is responsible for safety?

Experience has shown that most accidents happen in private households. Not infrequently they happen because elementary ground rules were not met, or negligently acted.

Of course, a food processor is not immediately a dangerous machine. However, the structure and the functions compel caution. This includes compliance with the safety and handling instructions given in the operating instructions. Structural and conceptual weaknesses in combination with carelessness can quickly lead to damage.

What Do You Have To Consider?

So that food processor and safety are not contradictory, please note the following notes:

Installation Of The Machine

The housings and accessories of most machines are made of aluminum, plastic or stainless steel. For some functions, a relatively high effort is required, or a larger amount of ingredients is moved. This sometimes happens at very high speeds, which can lead to vibrations in some machines. To ensure safe working, not only the weight of the kitchen operator is sufficient, but you must use a solid and stable storage space. The controls should be easy to reach and the power cord should be routed so that it does not interfere.

Correct Installation

Not only the knives and stirring tools, but also the pots and lids must be correctly placed and, as far as possible, locked. This also means that the seals are sitting properly. These are wearing parts. Notice changes, buy new ones in retail. A defective seal not only allows the (hot) ingredients to splash around, but also prevents the exact position of the lid.

If you notice loose or defective housing parts, the machine must be repaired. The parts not only serve to protect the internal components, but they are load-bearing elements. They absorb the forces that occur and pass them on.

During Operation

Make sure during the preparation of your food constantly that the machine parts (drives, knives, covers and swivel arm) are correctly seated. Basically, the work should conform to the device performance to prevent overloading. Even if an overload protection circuit normally responds, precaution can not hurt.

Be sure to avoid tipping into the containers when the knives and agitators are still rotating. Unfortunately, the stop function does not always work when switching off or removing the covers. In addition, some devices are partially work possible without a lid is attached.

Dough kneading can quickly become a fiasco. If the dough is not completely detached from the edge, you’d better help with your finger. Please take special note if children are nearby and would like to help!

Maintenance and Care

Please observe the cleaning instructions of the manufacturer. Check exactly how the components are allowed in the dishwasher. The reason is possible deformations that hinder the error-free function and thus can lead to a security risk.

Gaskets can become brittle and cracked. This has nothing to do with lack of care, but is due to the material properties. Please replace them in a timely manner so that these parts do not affect the safety of your food processor.

In order to ensure the variety of functions, some of the power transmission machines have transmission arms. Apart from a cleaning there is no further maintenance possibility for you. However, oil may drip out of the gearbox after a long time. To ensure the continued functionality of your machine, professional maintenance or even repair is now required. Please also read this post .

If you find that a lock or the micro-switch of a safety precaution no longer works correctly, send the device to a specialist workshop. In any case, do not omit or otherwise “outwit” these elements. The danger that then emanates from the device is very large.